Other information:
Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (A) on the bottom of the condenser with a L wrench.
Tightening torque :
9.81 - 14.71 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft)
...
Schematic diagrams
Circuit Diagram
Repair procedures
Inspection
1.
Disconnect the BCW switch connector from the side crash pad switch.
2.
Operate the BCW switch, then check for continuity between terminals and
BCW swit ...