Kia Forte: Scheduled maintenance service / Maintenance Under Severe Usage Conditions Turbo Models

Kia Forte 2019-2024 (BD) Owner's Manual / Maintenance / Scheduled maintenance service / Maintenance Under Severe Usage Conditions Turbo Models

The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals.

R : Replace

I : Inspect and, after inspection, clean, adjust, repair or replace if necessary

Severe driving conditions

A- Repeatedly driving short distances of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in freezing temperature

B- Extensive engine idling or low speed driving for long distances

C-Driving on rough, dusty, muddy, unpaved, graveled or saltspread roads

D-Driving in areas using salt or other corrosive materials or in very cold weather

E-Driving in heavy dust distances

F - Driving in heavy traffic areas

G- Driving on uphill, downhill, or mountain roads repeatedly

H-Towing a Trailer, or using a camper, or roof rack

I -Driving as a patrol car, taxi, other commercial use or vehicle towing

J - Driving over 170 km/h (106 mph)

K-Frequently driving in stop-and-go conditions

    The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty.

    Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Components of the Tire Mobility Kit (TMK)

    1. Speed restriction label 2. Sealant bottle and label with speed restriction 3. Filling sealant and air hose from sealant bottle to wheel 4. Connectors and cable for the power outlet direct connection 5. Holder for the sealant bottle 6.

    Kia Forte 2019-2024 (BD) Owner's Manual: Headlamp (Low beam) bulb replacement (Headlamp Type A,B)

    1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.

    Categories

     
    Copyright © 2026 www.kiforte.com - 0.0091