
■ Head lamp - Type A

■ Head lamp - Type B

■ Head lamp – Type C

■ Front turn signal lamp

■ Fog lamp

■ Day time running lamp
(1) Headlamp (Low) (Bulb type)
(2) Headlamp (High) (Bulb type)
(3) Side marker (Bulb type)
(4) Day time running lamp / Position
lamp (LED type)
(5) Headlamp (Low/High) (LED type)
(6) Side marker (LED type)
(7) Front turn signal lamp (Bulb type)
(8) Front fog lamp (Bulb type)
(9) Day time running lamp (Bulb
type)
Bulb replacement precaution Please keep extra bulbs on hand with appropriate wattage ratings in case of emergencies. Refer to the "Bulb Wattage" section in Chapter 8.
■ Rear combination lamp - Type A ■ Rear combination lamp - Type B (1) Stop and tail lamp (Bulb type) (2) Tail lamp (Bulb type) (3) Side marker (Bulb type) (4) Stop lamp (LED type) (5,6) Tail lamp (LED type) (7) Side marker (LED type) ■ Rear turn signal lamp / Back up lamp ■ License plate lamp (8) Rear turn signal lamp (Bulb type) (9) Back Up lamp (Bulb type) (10) License plate lamp (Bulb type) ■ High mounted stop lamp (11) High mounted stop lamp (Bulb or LED type)
For best battery service Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spilled electrolyte from the battery immediately with a solution of water and baking soda.
WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.