Kia Forte: Tires and wheels / Tire pressure

Always observe the following:

  • Check tire pressure when the tires are cold. (After vehicle has been parked for at least three hours or hasn't been driven more than 1.6 km (one mile) since startup.)
  • Check the pressure of your spare tire each time you check the pressure of other tires.
  • Never overload your vehicle. Be careful not to overload a vehicle luggage rack if your vehicle is equipped with one.
  • Warm tires normally exceed recommended cold tire pressures by 28 to 41 kPa (4 to 6 psi). Do not release air from warm tires to adjust the pressure or the tires will be underinflated.

WARNING - Tire Inflation

Overinflation or underinflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure. This could result in loss of vehicle control and potential injury.

    Tire care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.

    Check your tires once a month or more. Also, check the tire pressure of the spare tire. How to check Use a good quality gauge to check tire pressure.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Scheduled maintenance service

    Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe Usage Conditions. Repeatedly driving short distances of less than 8 km (5 miles) in normal temperature or less than 16 km (10 m

    Kia Forte 2019-2024 (BD) Owner's Manual: Stop and tail lamp/side marker (Bulb type) bulb replacement (Rear combination lamp Type A)

    1. Open the trunk lid. 2. Open the service cover. 3. Remove the nuts from the vehicle. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2026 www.kiforte.com - 0.015