
Turn the tire hold-down wing bolt counterclockwise to remove.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them properly.

If it is hard to loosen the tire hold down wing bolt by hand, you can loosen it easily using the jack handle. 1. Put the jack handle (1) inside of the tire hold-down wing bolt.2. Turn the tire hold-down wing bolt counterclockwise with the jack handle.
WARNING - Touching surface of the luggage room floor
Do not touch the metal surface of the luggage room floor while the engine is operating or hot. Doing so could result in serious bodily injury.
Turn the engine off and wait until it cools down or wear globes to remove the spare tire from the luggage room.
Jack and tools The jack and wheel lug nut wrench are stored in the luggage compartment. Remove the panel indicated in the illustration. (1) Jack handle (2) Jack (3) Wheel lug nut wrench Jacking instructions The jack is provided for emergency tire changing only.
1. Park on a level surface and apply the parking brake firmly. 2. Place the transmission shift lever in P (Park) with Dual clutch transmission/ Intelligent variable transmission and R (Reverse) with manual transmission.
Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately.
Vehicle identification number (VIN) ■ VIN label The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windshield from outside. Vehicle certification label The vehicle certification label attached on the driver’s side center pillar gives the vehicle identific