Kia Forte: Driving your vehicle

Kia Forte 2019-2024 (BD) Owners Manual / Driving your vehicle

Be sure the exhaust system does not leak.

The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the exhaust or if you drive over something that strikes the under side of the vehicle, have the exhaust system checked as soon as possible by an authorized Kia dealer.

WARNING - Engine exhaust

Do not inhale exhaust fumes or leave your engine running in a enclosed area for a prolonged time. Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyxiation.

WARNING - Open trunk

Do not drive with the trunk open. Poisonous exhaust gases can enter the passenger compartment. If you must drive with the trunk open proceed as follows:

1. Close all windows

2. Open side vents.

3. Set the air intake control at “Fresh”, the air flow control at “Floor” or “Face” and the fan at the highest speed.

How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio ...

Before driving
Before entering vehicle Be sure that all windows, outside mirror(s), and outside lights are clean. Check the condition of the tires. Check under the vehicle for any sign of leaks. B ...

Other information:

Kia Forte 2019-2024 (BD) Owners Manual: Light bulb position (Front)


■ Head lamp - Type A ■ Head lamp - Type B ■ Head lamp – Type C ■ Front turn signal lamp ■ Fog lamp ■ Day time running lamp (1) Headlamp (Low) (Bulb type) (2) Headlamp (High) (Bulb type) (3) Side marker (Bulb type) (4) Day time running lamp / Position lamp (LED ...

Kia Forte 2019-2024 (BD) Owners Manual: Side marker bulb replacement (Headlamp Type A,B)


1. Open the hood. 2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 3. Remove the bulb from the bulbsocket by pulling it out. 4. Insert a new bulb by inser ...

Copyright © www.kiforte.com 2017-2024