The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the User Settings Mode (Driver Assistance) and SCC Reaction. You may select one of following three stages:
• Slow:
Vehicle speed to the vehicle ahead to maintain the set distance is slower than normal speed.
• Normal:
Vehicle speed to the vehicle ahead to maintain the set distance is normal
• Fast:
Vehicle speed to the vehicle ahead to maintain the set distance is faster than normal speed.
✽ NOTICE
The last selected mode remains in the system.
■ Type A ■ Type B The message will appear when the vehicle to vehicle distance control system is not functioning normally. In this situation, take your vehicle to an authorized Kia dealer and have the system checked.
The driver may choose to only use the cruise control mode (speed control function) by doing as follows: 1. Turn the smart cruise control system on (the cruise indicator light will be on but the system will not be activated).
You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Should you have any doubts concerning the inspection or servicing of your vehicle, we strongly recommend that you have an authorized Kia dealer perform this work.
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. If the switch is located in the “OFF” position, a caution indicator will be displayed in the cluster. To identify the location of a specific fuse, please refer to the inside of the fuse panel cover and the description list in this section.