Kia Forte: Driving your vehicle / Forward Collision-avoidance Assist (FCA) (Camera + Radar type)

Kia Forte 2019-2024 (BD) Owner's Manual / Driving your vehicle / Forward Collision-avoidance Assist (FCA) (Camera + Radar type)

The FCA system is designed to detect and monitor the vehicle ahead or detect a pedestrian in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.

WARNING

Take the following precautions when using the Forward Collision-Avoidance Assist (FCA) system:

  • This system is only a supplemental system, and it is not intended to, nor does it, replace the need for the driver's extreme care and attention. The sensing range and objects detectable by the sensors are limited. Pay attention to road conditions at all times.
  • NEVER drive too fast for the road conditions or whilst cornering.
  • Always drive cautiously to help prevent unexpected and sudden situations from occurring. FCA does not guarantee to stop the vehicle completely and does not guarantee to avoid all collisions.

The FCA system is designed to monitor the vehicle ahead through camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.

System setting When the ignition switch is turned on, Forward Collision-Avoidance Assist (FCA) automatically gets activated. The system can be deactivated if the driver cancels the system from the instrument panel as follows : 'User settings → Driving assist → Forward Collision-Avoidance Assist' The warning light illuminates on the LCD display when you cancel the FCA system.

Other information:

Kia Forte 2019-2024 (BD) Owner's Manual: Tire sidewall labeling

This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall.

Kia Forte 2019-2024 (BD) Owner's Manual: Side repeater lamp (Bulb type) bulb replacement

1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

Categories

 
Copyright © 2026 www.kiforte.com - 0.0129