Kia Forte: Driver Attention Warning (DAW) / Resetting the system, System disabled

Kia Forte 2019-2024 (BD) Owner's Manual / Driving your vehicle / Driver Attention Warning (DAW) / Resetting the system, System disabled

Resetting the system

  • The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning system.
  • The driver attention warning system resets in the following situations.
    - The engine is turned OFF.
    - The driver unfastens the seat belt and then opens the driver’s door when stopped.
    - The driver takes a break from driving that lasts more than 10 minutes.
  • The driver attention warning system will operate again when the driver restarts driving.

System disabled

The Driver Attention Warning system enters the ready status and displays the 'Disabled' screen in the following situations.

- The camera sensor is unable to detect the lanes.
- Driving speed remains under 64 km/h (40 mph) or over 177 km/h (110 mph).

    System setting The Driver Attention Warning system is set to be the Normal position when your vehicle is first delivered to you from the factory.

    When the “Check System” warning message appears, the system is not working properly. In this situation, take your vehicle to an authorized Kia dealer and have the system checked.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Emergency towing

    ■ Front ■ Rear If towing is necessary, we recommend you to have it done by an authorized Kia dealer or a commercial tow truck service. If towing service is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing hook under the front (or rear) of the veh

    Kia Forte 2019-2024 (BD) Owner's Manual: Stop and tail lamp/side marker (Bulb type) bulb replacement (Rear combination lamp Type A)

    1. Open the trunk lid. 2. Open the service cover. 3. Remove the nuts from the vehicle. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2026 www.kiforte.com - 0.0073