
■ Type A

■ Type B
• If there is a problem with the system, a message will appear. If the problem continues, the LKA fail indicator will illuminate.
LKA fail indicator
The LKA fail indicator (yellow) will illuminate with an audible warning if the LKA is not working properly. If this occurs have the system checked by an authorized Kia dealer.
When there is a problem with the system, do one of the following:
If the problem is not solved, take your vehicle to an authorized Kia dealer and have the system checked.
If the vehicle leaves a lane, the lane marker you cross will blink on the LCD display. If the vehicle moves out of its lane because the steering torque for assistance is insufficient, the line indicator will blink.
The driver can change LKA to Lane Departure Warning (LDW) system or change the LKA mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display.
1.After driving approximately 7~10 km (4~6 miles) or about 10 minutes, stop at a suitable location. 2.Connect the filling hose (3) of the compressor (clip mounted side) directly and then connect the filling hose (3) (opposite side) to the tire valve.
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.