On inclines

Lane changing

• If a vehicle which moves into your lane is faster than your vehicle, your vehicle will accelerate to the selected speed.

The smart cruise control system may have limits to its ability to detect distance to the vehicle ahead due to road and traffic conditions. On curves On curves, the smart cruise control system may not immediately detect a moving vehicle in your lane, and then your vehicle could accelerate to the set speed.
Some of the following vehicles ahead in your lane may not be recognized by the sensor: - Narrow vehicles such as motorcycles or bicycles - Vehicles offset to one side - Slow-moving vehicles or suddenly decelerating vehicles - Stopped vehicles - Vehicles with small rear profiles such as trailers with no loads A vehicle ahead may not be recognized correctly by the sensor when any of the following occurs: - When the vehicle is pointing upwards due to overloading in the trunk(tailgate) - While making turns - When driving to one side of the lane - When driving on narrow lanes or on curves Adjust your vehicle speed by depressing the brake pedal according to the road and driving conditions ahead.
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
If the high mounted stop lamp (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer. The LED lamp cannot be replaced as a single component because it is an integrated unit. The LED lamp has to be replaced with the unit.