Kia Forte: Child Restraint System (CRS) / Installing a Child Restraint System (CRS)
After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle:
- Properly secure the child restraint to the vehicle. All child restraints must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH system.
- Make sure the child restraint is firmly secured. After installing a child restraint to the vehicle, push and pull the seat forward and from side-to-side to verify that it is securely attached to the seat. A child restraint secured with a seat belt should be installed as firmly as possible. However, some side-toside movement can be expected.
- Secure the child in the child restraint. Make sure the child is properly strapped in the child restraint according to the manufacturer instructions.
- Lower Anchors and Tether for Children (LATCH) System
- Securing a child restraint with the LATCH anchors system
- Securing a child restraint seat with “Tether Anchor” system
- Securing a child restraint with a lap/shoulder belt
When selecting a CRS for your child, always: Make sure the CRS has a label certifying that it meets applicable Safety Standards of your country.
The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly installing your child restraint.
Other information:
Kia Forte 2019-2024 (BD) Owner's Manual: Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle. Any adverse conditions should be brought to the attention of your dealer as soon as possible.
Kia Forte 2019-2024 (BD) Owner's Manual: Stop and tail lamp/side marker (Bulb type) bulb replacement (Rear combination lamp Type A)
1. Open the trunk lid. 2. Open the service cover. 3. Remove the nuts from the vehicle. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
Categories
- Manuals Home
- Kia Forte Owners Manual
- Folding the rear seat
- Trunk
- Recommended lubricants and capacities
- New on site
- Most important about car
