Kia Forte: Specifications & Consumer information

Kia Forte 2019-2024 (BD) Owner's Manual / Specifications & Consumer information

Dimensions

Engine

Bulb wattage

Tires and wheels

CAUTION

When replacing tires, use the same size originally supplied with the vehicle. Using tires of a different size can damage the related parts or make them work irregularly.

✽ NOTICE

  • It is permissible to add 21 kPa (3 psi) to the standard tire pressure specification if colder temperatures are expected soon. Tires typically loose 7 kPa (1 psi) for every -11°C (12°F) temperature drop. If extreme temperature variations are expected, re-check your tire pressure as necessary to keep them properly inflated.
  • We recommend that when replacing tires, use the same originally supplied with the vehicles. If not, that affects driving performance.
  • When driving in high altitude grades, it is natural for the atmospheric pressure to decrease. Therefore, please check the tire pressure and add more air when necessary. Additionally required tire air pressure per km above sea level: 10.5 kPa (1.5 psi) km

Gross vehicle weight

Luggage volume

Air conditioning system

The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Warranty & Consumer Information manual in your vehicle.

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

Other information:

Kia Forte 2019-2024 (BD) Owner's Manual: Wheel replacement, Tire traction & maintenance

Wheel replacement When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, bod

Kia Forte 2019-2024 (BD) Owner's Manual: Side repeater lamp (Bulb type) bulb replacement

1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

Categories

 
Copyright © 2026 www.kiforte.com - 0.0077