Do not use the interior lights for extended periods when the engine is not running as this may cause battery discharge.
WARNING - Interior Lights
Do not use the interior lights when driving in the dark. Accidents could happen because the view may be obscured by interior lights.
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty.
Room lamp ■ Type A ■ Type B • : The light stays on at all times. Map lamp ■ Type A ■ Type B • Press the lens (1) to turn ON the map lamp.
1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 2. Filling the sealant: Strictly follow the specified sequence, otherwise the sealant may escape under high pressure.
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.