- For type A cluster

To change the trip mode, press the TRIP button.
- For type B, C cluster

To change the trip mode, scroll the MOVE scroll switch ( / ) or press the TRIP button in the trip computer mode.
■ Type A ■ Type B • The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel. - Distance range: 1 ~ 9,9999 km or 1 ~ 9,999 mi.
Tripmeter (1) The tripmeter is the total driving distance since the last tripmeter reset. - Distance range : 0 ~ 1599999 km or 0 ~ 999999 mi.
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between the MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fluid, clean the area around the reservoir cap thoroughly to prevent brake
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.