Kia Forte: Trip information (Trip computer) / Distance to empty

Kia Forte 2019-2024 (BD) Owner's Manual / Features of your vehicle / LCD windows / Trip information (Trip computer) / Distance to empty

■ Type A

■ Type B

• The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.

- Distance range: 1 ~ 9,9999 km or 1 ~ 9,999 mi.

• If the estimated distance is below 1 km (1 mi.), the trip computer will display “---” as distance to empty.

✽ NOTICE

  • If the vehicle is not on level ground or the battery power has been interrupted, the distance to empty function may not operate correctly.
  • The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
  • The trip computer may not register additional fuel if less than 6 liters (1.6 gallons) of fuel are added to the vehicle.
  • The fuel economy and distance to empty may vary significantly based on driving conditions, driving habits, and condition of the vehicle.

    The trip computer is a microcomputer- controlled driver information system that displays information related to driving. ✽ NOTICE Some driving information stored in the trip computer (for example Average Fuel Economy) resets if the battery is disconnected.

    - For type A cluster To change the trip mode, press the TRIP button. - For type B, C cluster To change the trip mode, scroll the MOVE scroll switch ( / ) or press the TRIP button in the trip computer mode.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Normal Maintenance Schedule - Turbo Models

    The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time are shown, the frequency of service is determined by whichever occurs first.

    Kia Forte 2019-2024 (BD) Owner's Manual: Stop and tail lamp/side marker (Bulb type) bulb replacement (Rear combination lamp Type A)

    1. Open the trunk lid. 2. Open the service cover. 3. Remove the nuts from the vehicle. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2025 www.kiforte.com - 0.0154