Kia Forte: Smart Cruise Control speed / To resume cruise control set speed

Reset

If any method other than the “RES+” or “SET-“ lever was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you push the lever up (RES+) or down (SET-).

If you push the lever up (RES+), the speed will resume to the recently set speed. However, if vehicle speed is between 10 km/h (6 mph) and 30 km/h (20 mph), it will resume when there is a vehicle in front of your vehicle.

WARNING

To reduce the risk of an accident, always check the road conditions when reactivating the smart cruise control using the RES+ lever to ensure the road conditions permit safe use of the cruise control.

    Cancelled manually The smart cruise control is temporarily canceled when the brake pedal is depressed or the CANCEL button is pressed. Depress the brake pedal and press the CANCEL button at the same time when the vehicle is at a standstill.

    Press the CRUISE button. (the CRUISE indicator in the instrument cluster will go off). When the Smart Cruise Control System is not needed, press the [CRUISE] switch and deactivate the system.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Jack label

    1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is supported by a jack. 6. The designated locations under the frame 7.

    Kia Forte 2019-2024 (BD) Owner's Manual: Inner panel fuse replacement

    1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. If the switch is located in the “OFF” position, a caution indicator will be displayed in the cluster. To identify the location of a specific fuse, please refer to the inside of the fuse panel cover and the description list in this section.

    Categories

     
    Copyright © 2026 www.kiforte.com - 0.009