
Follow either of these procedures:
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2.
Follow either of these procedures: Move the lever down (to SET-) and hold it.Your vehicle SET speed will decrease by 10 km/h (5 mph). Release the lever at the speed you want to maintain.
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. Aftermarket wiper blades may result in wiper malfunction and/or failure.
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.