
Follow either of these procedures:
To temporarily accelerate with the cruise control on:
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with the cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
Follow either of these procedures: Move the lever up (to RES+) and hold it.Your vehicle SET speed will increase by 10 km/h (5 mph). Release the lever at the speed you want.
Depress the brake pedal. Shift into N (Neutral) with an Intelligent Variable Transmission / Dual clutch transmission. Press the CANCEL switch.
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. Aftermarket wiper blades may result in wiper malfunction and/or failure.
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out.