Kia Forte: Hood / Hood Latch Release Handle

Kia Forte 2019-2020 (BD) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle

Components and components location
Component Location

1. Hood latch release handle


Repair procedures
Replacement
1.

Remove the hood release handle (A).

2.

To install, reverse the removal procedure.

  

Make sure the hood latch cable is connected properly.

Make sure the hood locks / unlocks and opens / closes properly.

Hood Insulator Pad
Repair procedures Replacement 1. Using a clip remover, remove the clips and then the hood insulator pad (A).    ...

Hood Latch
Components and components location Component Location 1. Hood latch assembly Repair procedures Replacement [Hood lower latch assembly] ...

Other information:

Kia Forte 2019-2020 (BD) Service Manual: Side Impact Sensor (SIS)


Description and operation Description • Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) installed at each center of the front door module (LH and RH), two SIS installed at each center pillar nearby (LH and RH). ...

Kia Forte 2019-2020 (BD) Owners Manual: Securing a child restraint seat with “Tether Anchor” system


First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on t ...

Copyright © www.kiforte.com 2017-2020