Kia Forte: Chassis / Brake/Clutch Fluid
Repair procedures
Check the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir.

Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification.
Check the brake system for any leakage if the fluid level is extremely low (lower
than MIN).
Repair procedures
Inspection
Visually check for proper installation, chafing, cracks, deterioration and any
leakage.
Replace any deteriorated or damaged parts immediately. ...
Other information:
Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).
3.
To install, reverse the removal procedure.
...
To see the LKA screen on the LCD
display in the cluster, Tab to the
ASSIST mode ().
For further details, refer to the [menu
settings] section in Chapter 4.
After LKA is activated, if both lane
markers are detected, vehicle
speed is over 64 km/h (40 mph)
and all the activatio ...