Kia Forte: Electronic stability control
(ESC) / ESC operation
ESC ON condition

- When the ignition is turned
ON, ESC and ESC OFF
indicator lights illuminate for
approximately 3 seconds,
then ESC is turned on.
- Press the ESC OFF button
for at least half a second
after turning the ignition
ON to turn ESC off.
(ESC OFF indicator will
illuminate). To turn the
ESC on, press the ESC
OFF button (ESC OFF
indicator light will go off).
- When starting the engine,
you may hear a slight ticking
sound. This is the ESC
performing an automatic
system self-check and does
not indicate a problem.
When operating

When the ESC is in operation,
the ESC indicator light
blinks.
- When the Electronic
Stability Control is operating
properly, you can feel a
slight pulsation in the vehicle.
This is only the effect
of brake control and indicates
nothing unusual.
- When moving out of the
mud or driving on a slippery
road, pressing the
accelerator pedal may not
cause the engine rpm
(revolutions per minute) to
increase.
The Electronic Stability control
(ESC) system is designed to stabilize
the vehicle during cornering
maneuvers. ESC checks where you
are steering and where the vehicle is
actually going. ES ...
ESC OFF state
There are 2 types of ESC
OFF states: Traction Control
disabled and Traction &
Stability Control disabled.
If the ignition is turned off
when ESC is off, ESC
remains off ...
Other information:
To see the LKA screen on the LCD
display in the cluster, Tab to the
ASSIST mode ().
For further details, refer to the [menu
settings] section in Chapter 4.
After LKA is activated, if both lane
markers are detected, vehicle
speed is over 64 km/h (40 mph)
and all the activatio ...
This warning light illuminates:
Once you set the ignition switch or
Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
When one or more of your tires are
significantly underinflated.
❈For more details, refer to the ...