Kia Forte: Trip information (Trip computer) / Trip A/B (For type A cluster)

Tripmeter (1)
- The tripmeter is the total driving
distance since the last tripmeter
reset.
- Distance range : 0 ~ 1599999 km
or 0 ~ 999999 mi.
- To reset the tripmeter, press the
RESET button on the steering
wheel for more than 1 second
when the tripmeter is displayed.
- 4 hours after the ignition is turned
off, the tripmeter will be reset
automatically.
Elapsed Time (2)
- The elapsed time is the total driving
time since the last elapsed time
reset.
- Time range (hh:mm) : 00:00 ~
99:59
- To reset the elapsed time, press
the RESET button on the steering
wheel for more than 1 second
when the elapsed time is displayed.
✽ NOTICE
Even if the vehicle is not in motion,
the elapsed time keeps going while
the engine is running.
Average Vehicle Speed (3)
- The average vehicle speed is calculated
by the total driving distance
and driving time since the
last average vehicle speed reset.
- Speed range : 0 ~ 250 km/h or
MPH
- To reset the average vehicle
speed, press the RESET button
on the steering wheel for more
than 1 second when the average
vehicle speed is displayed.
✽ NOTICE
- The average vehicle speed is not
displayed if the driving distance is
less than 300 meters (0.2 miles) or
the driving time is less than 10 seconds
since the ignition switch is
turned to ON.
- Even if the vehicle is not in
motion, the average vehicle speed
keeps going while the engine is
running.
- For type A cluster
To change the trip mode, press the
TRIP button.
- For type B, C cluster
To change the trip mode, scroll the
MOVE scroll switch ( / ) or press
the TRIP button in the t ...
■ Type A
■ Type B
Average Fuel Economy (1)
The average fuel economy is calculated
by the total driving distance
and fuel consumption since the last
average fuel economy reset.
...
Other information:
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
...
Components and components location
Component Location
1. Cowl cross bar assembly
Repair procedures
Replacement
Put on gloves to prevent hand injuries.
...