Kia Forte: Smart Cruise Control / To convert to cruise control
mode


The driver may choose to only use
the cruise control mode (speed control
function) by doing as follows:
1. Turn the smart cruise control system
on (the cruise indicator light
will be on but the system will not
be activated).
2. Push the distance to distance
switch for more than 2 seconds.
3. Choose between "Smart Cruise
Control" and "Cruise Control".
When the system is canceled using
the CRUISE button or the CRUISE
button is used after the engine is
turned on, the Smart Cruise Control
mode will turn on.
WARNING
When using the cruise control
mode, you must manually
assess the distance to other
vehicles as the system will not
automatically brake to slow
down for other vehicles.
The sensitivity of vehicle speed when
following the front vehicle to maintain
the set distance can be adjusted. Go
to the User Settings Mode (Driver
Assistance) and SCC Reaction. You
may sel ...
The smart cruise control system may
have limits to its ability to detect distance
to the vehicle ahead due to
road and traffic conditions.
On curves
On curves, the smart cruise control
...
Other information:
1. Remove the lamp assembly from
the vehicle by prying the lens and
pulling the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens
parts by turning the socket counterclockwise
until the tabs on the
socket align with the slots on the
lens pa ...
■ Type A
■ Type B
The message will appear when the
vehicle to vehicle distance control
system is not functioning normally.
In this situation, take your vehicle to
an authorized Kia dealer and have
the system checked.
CAUTION
Do not install accessories
around the sensor and ...