Kia Forte: Vehicle to vehicle distance
setting / Radar to detect distance to the
vehicle ahead

The sensor detects the distance to
the vehicle ahead.
If the sensor is covered with dirt or
other foreign matter, the vehicle to
vehicle distance control may not
operate correctly.
Always keep the area in front of the
sensor clean.
To set vehicle to vehicle distance:
This function allows you to program
the vehicle to maintain a relative distance
to the vehicle ahead without
depressing the accelerator pedal or
brake pe ...
■ Type A
■ Type B
When the sensor lens cover is blocked
with dirt, snow, or debris, the Smart
Cruise Control System operation may
stop temporarily. If this occurs, a warning
message ...
Other information:
Repair procedures
Removal & Installation
In case of removing the high pressure fuel pump, high pressure fuel pipe,
delivery pipe, and injector, there may be injury caused by leakage of the
high pressure f ...
1.After driving approximately 7~10
km (4~6 miles) or about 10 minutes,
stop at a suitable location.
2.Connect the filling hose (3) of the
compressor (clip mounted side)
directly and then connect the filling
hose (3) (opposite side) to the tire
valve.
3.Connect the compressor to the
v ...