With the door lock button

WARNING
Do not pull the inner door handle while the vehicle is moving.
If a power door lock ever fails to function while you are in the vehicle, try one or more of the following techniques to exit:
With central door lock switch

Operate by pressing the central door lock switch.
WARNING - Doors
WARNING - Unattended children/animals
Never leave children or animals unattended in your vehicle.
An enclosed vehicle can become extremely hot, causing death or severe injury to unattended children or animals who cannot escape the vehicle.
Impact sensing door unlock system
All doors will automatically unlock when an impact causes the air bags to deploy.
Engine off door unlock system
All doors will automatically unlock:
- Without smart key system
When the key is removed from the ignition switch.
- With smart key system
When the engine start/stop button is in the OFF position.
Operating door locks from outside the vehicle To remove the cover (if equipped, for type C) : 1. Pull out the door handle. 2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out.