Operating door locks from outside the vehicle

To remove the cover (if equipped, for type C) :
1. Pull out the door handle.
2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
3. Push out the cover (2) while pressing the lever.
✽ NOTICE
WARNING
If passengers must remain in the vehicle while it is very hot or cold outside, there is risk of injuries or danger to life. Do not lock the vehicle from the outside when there are passengers in the vehicle.
WARNING
CAUTION
Do not open and close the door repeatedly if unnecessary or with excessive force. Such action can damage the vehicle door.
The system will be disarmed when: Transmitter - The door unlock button is pressed. - The engine is started. (within 3 seconds) - The ignition switch is in the "ON" position for 30 seconds or more.
With the door lock button To unlock a door, pull the door lock button (1) to the “Unlock” position. The red mark on the handle will be visible.
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.