Kia Forte: Heating and air conditioning / MAX A/C selection
The MAX A/C mode is used to cool
the inside of the vehicle faster.
Air flow is directed toward the upper
body and face.
In this mode, the air conditioning and
the recirculated air position will be
selected automatically.
■ Type A
■ Type B
Instrument panel vents
- Type A
The outlet vents can be opened or
closed separately using the thumbwheel.
To close the vent, rotate it
downward to the maximum position.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.
- Type B
The outlet vents can be opened or
closed separately turning the knob
right or left. Also, you can adjust the
direction of air delivery from these
vents by moving the knob in any
direction.
The mode selection knob controls
the direction of the air flow through
the ventilation system.
Air can be directed to the floor, dashboard
outlets, or windshield. Five
symbols are used to r ...
Temperature control
The temperature control knob allows
you to control the temperature of the
air flowing from the ventilation system.
To change the air temperature in the
passenger compart ...
Other information:
The High Beam Assist is a system
that automatically adjusts the headlamp
range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
Operating condition
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by p ...
Components and components location
Components
1. Cylinder head cover
2. Cylinder head cover gasket
3. Cylinder head assembly
4. Cylinder head gasket
5. Camshaft bearing cap
6. Camshaft front bearing cap
7. O-ring
8. Exhaust OCV (Oil Contr ...