
■ Type A

■ Type B
(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type)
■ Rear combination lamp - Type A ■ Rear combination lamp - Type B (1) Stop and tail lamp (Bulb type) (2) Tail lamp (Bulb type) (3) Side marker (Bulb type) (4) Stop lamp (LED type) (5,6) Tail lamp (LED type) (7) Side marker (LED type) ■ Rear turn signal lamp / Back up lamp ■ License plate lamp (8) Rear turn signal lamp (Bulb type) (9) Back Up lamp (Bulb type) (10) License plate lamp (Bulb type) ■ High mounted stop lamp (11) High mounted stop lamp (Bulb or LED type)
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage.
You can help prevent corrosion from beginning by observing the following: Keep your vehicle clean The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important.