
(1) Trip Computer mode
This mode displays driving information like the tripmeter, fuel economy, and so on.
❈ For more details, refer to “Trip Computer” in this chapter.
(2) Turn By Turn mode(if equipped) This mode displays “turn by turn” instructions from the navigation system.
(3) Assist mode
-
: This mode displays the state
of tire pressure.
(4) User Setting mode
On this mode, you can change the settings of the doors, lamps and so on.
(5) Master warning mode
This mode informs of warning messages related to the below functions.
- Blind-Spot Collision Warning
(BCW) malfunction (if equipped)
- Blind-Spot Collision Warning
(BCW) radar blind (if equipped)
- Cruise Control system malfunction
(if equipped)
- Lamp malfunction
- LED head lamp malfunction (if
equipped)
- Engine oil shortage
❈ For controlling the LCD modes, refer to “LCD window Control” in this chapter.
The vehicle will display Driving Information once per once per each ignition cycle. Fuel efficiency is calculated after the vehicle has run for more than 300 meters (0.
Service in It calculates and displays (in mileage or days) when you need a scheduled maintenance service. If the remaining mileage or time reaches 1,500 km (900 mi.
1. Park on a level surface and apply the parking brake firmly. 2. Place the transmission shift lever in P (Park) with Dual clutch transmission/ Intelligent variable transmission and R (Reverse) with manual transmission. 3. Activate the hazard warning flashers.
1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 2. Filling the sealant: Strictly follow the specified sequence, otherwise the sealant may escape under high pressure.