
Follow either of these procedures:
CAUTION
Check the driving condition before using the toggle switch. Driving speed sharply increases when you push up and hold the toggle switch.
To set Smart Cruise Control Speed : 1. Press the CRUISE button to turn the system on. The CRUISE indicator in the instrument cluster will illuminate.
Follow either of these procedures: Move the lever down (to SET-), and hold it. Your vehicle set speed will decrease by 10 km/h (5 mph). Release the lever at the speed you want.
If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire.
If the Low/High beam lamp(1), Day time running lamp/Position lamp(2), side marker(3) do not operate, have the vehicle checked by an authorized Kia dealer. The LED lamp cannot be replaced as a single component because it is an integrated unit.