
On a vehicle equipped with a smart key, the trunk can be opened with no-touch activation using the Smart Trunk system.
How to use the Smart Trunk
The trunk can be opened with notouch activation if the conditions below are satisfied.
✽ NOTICE
• The Smart Trunk does not operate when:
- The smart key is detected within
15 seconds after the doors are
closed and locked, and is continuously
detected.
- The smart key is detected within
15 seconds after the doors are
closed and locked, and 1.5 m (60
inches) from the front door handles.
(for vehicles equipped with
Welcome Light)
- A door is not locked or closed.
- The smart key is in the vehicle.

1. Setting
To activate the Smart Trunk,
(1) Change the LCD modes to User
setting mode
(2) Select the Door mode
(3) Check the Smart Trunk.

2. Detect and Alert
If you are positioned in the detecting area (50 ~ 100 cm (20 ~ 40 inches) behind the vehicle) carrying a smart key, the hazard warning lights will blink and chime will sound for about 3 seconds to alert you the smart key has been detected and the trunk will open.
✽ NOTICE
Do not approach the detecting area if you do not want the trunk to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, leave the detecting area with the smart key. The trunk will stay closed.

3. Automatic opening
The hazard warning lights will blink and chime will sound 2 times and then the trunk will open.
WARNING
Make sure objects in the rear cargo area do not come out when opening the trunk as this could cause serious injury.
✽ NOTICE
The key should be kept out of reach of children. Children may inadvertently open the Smart Trunk while playing around the rear area of the vehicle.
Otherwise, the trunk may open inadvertently.
How to deactivate the Smart Trunk function using the smart key

1. Door lock
2. Door unlock
3. Trunk open
4. Panic alarm
If you press any button of the smart key during the Detect and Alert stage, the Smart Trunk function will be deactivated.
Make sure to be aware of how to deactivate the Smart Trunk function for emergency situations.
✽ NOTICE
Detecting area

✽ NOTICE
Your vehicle is equipped with an emergency trunk release lever located inside the trunk. If someone is inadvertently locked in the trunk, moving the handle in the direction of the arrow will release the trunk latch mechanism and open the trunk.
(1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (left) power window switch (4) Rear door (right) power window switch (5) Window opening and closing (6) Automatic power window up*/ down* (7) Power window lock button ✽ NOTICE In cold and wet climates, power windows may not work properly due to freezing conditions.
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out.
You can help prevent corrosion from beginning by observing the following: Keep your vehicle clean The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important.