Kia Forte: Manual heating and air conditioning / Air intake control
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Outside (fresh) air position
If the recirculated air position is not selected or turned off, air enters the vehicle from outside and is heated or cooled according to the function selected.
Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows, and the air within the passenger compartment may become stale.
In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.
Temperature control
The temperature will increase to the
maximum (HI) by turning the knob all
the way to the right.
The temperature will decrease to the
minimum (Lo) by turning the knob all
the way to the left ...
Fan speed control
The fan speed can be set to the
desired speed by operating the fan
speed control button.
To change the fan speed, press the
() button for higher speed, or push
() the button for lower speed ...
Other information:
Kia Forte 2019-2025 (BD) Owners Manual: Closing the trunk
To close, lower the trunk lid, then press down on it until it locks. To be sure the trunk lid is securely fastened, always check by trying to pull it up again. WARNING - Exhaust Fumes The trunk lid should always be kept completely closed while the vehicle is in motion. If it is lef ...
Kia Forte 2019-2025 (BD) Service Manual: Front Door Belt Outside Weatherstrip
Repair procedures Replacement 1. Pull down the front door window glass to the lowest level by pressing the power window glass switch. 2. Remove the front door belt outside weatherstrip (A). 3. To install, re ...
