
The fan speed can be set to the desired speed by operating the fan speed control button.
To change the fan speed, press the
(
) button for higher speed, or push
(
) the button for lower speed. To
turn the fan speed control off, press
the front blower OFF button.
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Press the A/C button to turn the air conditioning system on (indicator light will illuminate). Press the button again to turn the air conditioning system off.
1.After driving approximately 7~10 km (4~6 miles) or about 10 minutes, stop at a suitable location. 2.Connect the filling hose (3) of the compressor (clip mounted side) directly and then connect the filling hose (3) (opposite side) to the tire valve.
If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire.