Kia Forte: System operation / Air conditioning
Kia Air Conditioning Systems are
filled with R-1234yf refrigerant.
1.Start the engine. Push the air conditioning
button.
2.Set the mode to the position.
3.Set the air intake control to the outside
air or recirculated air position.
4.Adjust the fan speed control and
temperature control to maintain
maximum comfort.
- The refrigerant system should only
be serviced by trained and certified
technicians to ensure proper and
safe operation.
- The refrigerant system should be
serviced in a well-ventilated place.
- The air conditioning evaporator
(cooling coil) should never be
repaired or replaced with one
removed from a used or salvaged
vehicle, and new replacement MAC
evaporators should be certified (and
labeled) as meeting SAE Standard
J2842.
CAUTION - Excessive A/C
When using the air conditioning
system, monitor the temperature
gauge closely while driving
up hills or in heavy traffic when
outside temperatures are high.
Air conditioning system operation
may cause engine overheating.
Continue to use the
blower fan but turn the air conditioning
system off if the temperature
gauge indicates engine
overheating.
CAUTION
When opening the windows in
humid weather, air conditioning
may create water droplets
inside the vehicle. Since excessive
water droplets may cause
damage to electrical equipment,
air conditioning should only be
used with the windows closed.
Air conditioning system operation tips
- If the vehicle has been parked in
direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.
- To help reduce moisture inside of
the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
conditioning system.
- During air conditioning system
operation, you may occasionally
notice a slight change in engine
speed as the air conditioning compressor
cycles. This is a normal
operating characteristic of the system.
- Use the air conditioning system
every month for a few minutes to
ensure maximum system performance.
- When using the air conditioning
system, you may notice clear water
dripping (or even puddling) on the
ground under the passenger side
of the vehicle. This is a normal
operating characteristic of the system.
- Operating the air conditioning system
in the recirculated air position
provides maximum cooling, however,
continual operation in this
mode may cause the air inside the
vehicle to become stale.
- During cooling operation, you may
occasionally notice a misty air flow
because of rapid cooling and
humid air intake. This is a normal
operating characteristic of the system.
Ventilation
1.Set the mode to the position.
2.Set the air intake control to the outside
(fresh) air position.
3.Set the temperature control to the
desired position.
4.Set the fan speed contro ...
The climate control air filter installed
behind the glove box filters the dust
or other pollutants that come into the
vehicle from the outside through the
heating and air conditioning system ...
Other information:
Follow the Normal Maintenance
Schedule if the vehicle is usually
operated where none of the following
conditions apply. If any of the following
conditions apply, follow the
Maintenance Under Severe Usage
Conditions.
Repeatedly driving short distances
of less than 8 km (5 miles) in ...
Repair procedures
Inspection
1.
Check for continuity between terminals.
Pin
Function
1
Ground
2
Hazard lamp indicator
...