Kia Forte: Tires and wheels / Tire pressure

Kia Forte 2019-2025 (BD) Owners Manual / Maintenance / Tires and wheels / Tire pressure

Always observe the following:

Check tire pressure when the tires are cold. (After vehicle has been parked for at least three hours or hasn't been driven more than 1.6 km (one mile) since startup.)
Check the pressure of your spare tire each time you check the pressure of other tires.
Never overload your vehicle. Be careful not to overload a vehicle luggage rack if your vehicle is equipped with one.
Warm tires normally exceed recommended cold tire pressures by 28 to 41 kPa (4 to 6 psi). Do not release air from warm tires to adjust the pressure or the tires will be underinflated.

WARNING - Tire Inflation

Overinflation or underinflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure. This could result in loss of vehicle control and potential injury.

Tires and wheels

Tire care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution rec ...

Checking tire inflation pressure

Check your tires once a month or more. Also, check the tire pressure of the spare tire. How to check Use a good quality gauge to check tire pressure. You cannot tell if your tires are prope ...

Other information:

Kia Forte 2019-2025 (BD) Owners Manual: Engine coolant

The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year: at the beginning of the winter season, and before traveling to a colder climate. C ...

Kia Forte 2019-2025 (BD) Owners Manual: LKA function change

The driver can change LKA to Lane Departure Warning (LDW) system or change the LKA mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display. The driver can choose the mode by placing the ignition switch to the ON position and by selecting ‘User Setti ...