Kia Forte: Body Side Molding / Roof Side Molding

Kia Forte 2019-2024 (BD) Service Manual / Body (Interior and Exterior) / Body Side Molding / Roof Side Molding

Repair procedures
Replacement
  

Put on gloves to prevent hand injuries.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Using a remover, remove the roof side molding (A).

2.

To install, reverse removal procedure.

Rear Spoiler
Components and components location Component Location 1. Rear spoiler Repair procedures Replacement  &nb ...

Delta Garnish
Repair procedures Replacement    Put on gloves to prevent hand injuries.  & ...

Other information:

Kia Forte 2019-2024 (BD) Service Manual: Passenger Airbag (PAB) Module


Description and operation Description Installed inside the crash pad, the passenger airbag (PAB) protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.    ...

Kia Forte 2019-2024 (BD) Service Manual: Temperature Control Actuator


Description and operation Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then ...

Copyright © www.kiforte.com 2017-2024