Kia Forte: Driver Attention Warning (DAW) / Resetting the system, System disabled

Kia Forte 2019-2024 (BD) Owner's Manual / Driving your vehicle / Driver Attention Warning (DAW) / Resetting the system, System disabled

Resetting the system

  • The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning system.
  • The driver attention warning system resets in the following situations.
    - The engine is turned OFF.
    - The driver unfastens the seat belt and then opens the driver’s door when stopped.
    - The driver takes a break from driving that lasts more than 10 minutes.
  • The driver attention warning system will operate again when the driver restarts driving.

System disabled

The Driver Attention Warning system enters the ready status and displays the 'Disabled' screen in the following situations.

- The camera sensor is unable to detect the lanes.
- Driving speed remains under 64 km/h (40 mph) or over 177 km/h (110 mph).

    System setting The Driver Attention Warning system is set to be the Normal position when your vehicle is first delivered to you from the factory.

    When the “Check System” warning message appears, the system is not working properly. In this situation, take your vehicle to an authorized Kia dealer and have the system checked.

    Other information:

    Kia Forte 2019-2024 (BD) Owner's Manual: Inner panel fuse replacement

    1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. If the switch is located in the “OFF” position, a caution indicator will be displayed in the cluster. To identify the location of a specific fuse, please refer to the inside of the fuse panel cover and the description list in this section.

    Kia Forte 2019-2024 (BD) Owner's Manual: Side repeater lamp (Bulb type) bulb replacement

    1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

    Categories

     
    Copyright © 2026 www.kiforte.com - 0.0315