Kia Forte: Trip information (Trip computer) / One time driving information
mode (For type B, C cluster)

The vehicle will display Driving
Information once per once per each
ignition cycle.
- Fuel efficiency is calculated after
the vehicle has run for more than
300 meters (0.18 miles).
- The Driving Information will be
reset 4 hours after the ignition has
been turned off. So, if the vehicle
ignition is turned on within 4 hours,
the information will not be reset.
- If you press the "OK" button for
more than 1 second after the
Driving Information is displayed,
the information will be reset.
- If the engine is running, the information
will be accumulated even
when the vehicle is not in motion.
Digital speedometer

This mode displays the current
speed of the vehicle.
Displays accumulated information
starting from a mileage/fuel efficiency/
time default point.
Accumulated information is calculated
after the vehicle has run for
more than 300 meters ( ...
(1) Trip Computer mode
This mode displays driving information
like the tripmeter, fuel economy,
and so on.
❈ For more details, refer to “Trip
Computer” in this chapter.
(2) Turn By Tu ...
Other information:
Always observe the following:
Check tire pressure when the tires
are cold. (After vehicle has been
parked for at least three hours or
hasn't been driven more than 1.6
km (one mile) since startup.)
Check the pressure of your spare
tire each time you check the pressure
of other ...
Repair procedures
Inspection
1.
Remove the front seat outer shield cover.
(Refer to Body - "Front Seat Outer Shield Cover")
2.
When the battery power is supplied to the power seat control switch connector,
check the motor for smoo ...