Warning messages appear on the LCD to warn the driver. It is located in the center of the instrument cluster.
The warning message may appear differently depending on the type of instrument cluster and some may not show the warning message at all.
The warning message is shown in either symbol, symbol and text, or text type only. You can choose the preferred language by selecting the User setting menu in LCD mode.

Door, hood, trunk open
• This warning is displayed indicating which door, the hood, the trunk is open.

Sunroof Open (if equipped)
• This warning is displayed if you turn off the engine when the sunroof is open.
Engine has overheated
This warning message illuminates when the engine coolant temperature is above 120°C (248°F). This means that the engine is overheated and may be damaged.
❈If your vehicle is overheated, refer to the “Overheating” section in Chapter 6.
Shift to P (for smart key system)
Low Key Battery (for smart key system)
• This warning message illuminates if the battery of the smart key is discharged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turn steering (for smart key system)
Steering wheel unlocked (for smart key system)
• This warning message illuminates if the steering wheel does not lock when the Engine Start/Stop Button changes to the OFF position.
Check Steering Wheel Lock System (for smart key system)
• This warning message illuminates if the steering wheel does not lock normally when the Engine Start/Stop Button changes to the OFF position.
Check power steering (if equipped)
• This warning message illuminates when there is a malfunction with EPS.
Press brake pedal to start engine (for smart key system)
Press clutch pedal to start engine (for smart key system and manual transmission)
Key not in vehicle (for smart key system)
Key not detected (for smart key system)
Check high beam assist system (if equipped)
Press START button again (for smart key system)
Press START button with smart key (for smart key system)
Check fuse “BRAKE SWITCH” (for smart key system)
Shift to P or N to start engine (for smart key system)
✽ NOTICE
You can start the engine with the shift lever in the N (Neutral) position. But, for your safety, we recommend that you start the engine with the shift lever in the P (Park) position.
Check Forward Collision Avoidance Assist system (if equipped)
❈For more details, refer to the “Forward Collision-Avoidance Assist (FCA) system” section in Chapter 5.
On this mode, you can change setting of the doors, lamps, and so on. WARNING Do not adjust the User Setting while driving.You may lose your steering control and cause severe personal injury or accidents.
This warning is to warn the driver the road may be icy. When the following conditions occur, the warning light (including Outside Temperature Gauge) blinks 5 times and then illuminates, and also a warning chime sounds once.
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. Drive belts Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation, and rep
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. Aftermarket wiper blades may result in wiper malfunction and/or failure.