Kia Forte: Child Restraint System (CRS) / Installing a Child Restraint System (CRS)
After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle:
- Properly secure the child restraint to the vehicle. All child restraints must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH system.
- Make sure the child restraint is firmly secured. After installing a child restraint to the vehicle, push and pull the seat forward and from side-to-side to verify that it is securely attached to the seat. A child restraint secured with a seat belt should be installed as firmly as possible. However, some side-toside movement can be expected.
- Secure the child in the child restraint. Make sure the child is properly strapped in the child restraint according to the manufacturer instructions.
- Lower Anchors and Tether for Children (LATCH) System
- Securing a child restraint with the LATCH anchors system
- Securing a child restraint seat with “Tether Anchor” system
- Securing a child restraint with a lap/shoulder belt
When selecting a CRS for your child, always: Make sure the CRS has a label certifying that it meets applicable Safety Standards of your country.
The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly installing your child restraint.
Other information:
Kia Forte 2019-2024 (BD) Owner's Manual: Climate control air filter
Filter inspection The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.
Kia Forte 2019-2024 (BD) Owner's Manual: Wheel replacement, Tire traction & maintenance
Wheel replacement When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, bod
Categories
- Manuals Home
- Kia Forte Owners Manual
- Fuses
- Rear turn signal, Back up lamp bulb replacement
- Check tire pressure
- New on site
- Most important about car
