Kia Forte: Forward Collision-avoidance Assist (FCA) (Camera + Radar type) / Brake operation

Kia Forte 2019-2020 (BD) Owners Manual / Driving your vehicle / Forward Collision-avoidance Assist (FCA) (Camera + Radar type) / Brake operation

CAUTION

The driver should always exercise great caution during vehicle operation even though there is no warning message or warning alarm.

WARNING

The FCA system is a supplemental system and cannot completely stop the vehicle in all situations and avoid all collisions. It is the responsibility of the driver to drive safely and control the vehicle.

WARNING

The FCA system assesses the risk of a collision by monitoring several variables, such as the distance to the vehicle ahead, the speed of the vehicle ahead, and the driver's operation of the vehicle.

Certain conditions such as inclement weather and road conditions may affect the operation of the FCA system.

WARNING

Never deliberately drive dangerously to activate the system as such conduct increases the risk of an accident.

FCA warning message and system control
The FCA system produces warning messages, warning alarms, and emergency braking based on the risk of a frontal collision, such as when a vehicle ahead suddenly brakes. The driver can select t ...

Sensor to detect the distance from the vehicle in front (front radar/camera)
By detecting the vehicle or pedestrian ahead of the vehicle, the sensor helps to operate the Forward Collision-Avoidance Assist when the vehicle is at risk of a collision. In order for th ...

Other information:

Kia Forte 2019-2020 (BD) Owners Manual: Antenna


Glass antenna Your vehicle uses a glass antenna to receive both AM and FM signals. Shark fin antenna (if equipped) The shark fin antenna will receive transmitted data. CAUTION Do not clean the inside of the rear window glass or quarter glass with a cleaner or use a scraper to ...

Kia Forte 2019-2020 (BD) Owners Manual: Headlamp (High beam) bulb replacement (Headlamp Type A,B)


1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 4. Remove the bulb fr ...

Copyright © www.kiforte.com 2017-2020