Kia Forte: Chassis / Drive Shafts and Boots
Repair procedures
1. |
Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks
or damage.

|
Repair procedures
Inspection
Check the pads for excessive wear, discs for run out and wear, and calipers for
fluid leakage.
Front Brake
Front brake disc thickness check
...
Repair procedures
Inspection
Check whether the stroke is within specification when the parking brake lever
is depressed with 44 lbf, 196 N(20 kgf) of force. Also, the parking brake alo ...
Other information:
Follow either of these procedures:
Move the lever down (to SET-) and
hold it.Your vehicle SET speed will
decrease by 10 km/h (5 mph).
Release the lever at the speed you
want to maintain.
Move the lever down (to SET-) and
release it immediately. The cruising
speed will decre ...
If the engine stalls at a crossroad
or crossing
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the
vehicle to a safe place.
If you have a flat tire while
driving
If a tire goes flat while you are driving:
1. Take your foot ...