Kia Forte: Body / Climate Control Air Filter

Kia Forte 2019-2023 (BD) Service Manual / Maintenance / Body / Climate Control Air Filter

Repair procedures
Filter inspection

The climate control air filter should be replaced according to the maintenance schedule.

If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.

When replacing the climate control air filter, replace it by the following procedure and be careful not to damage other components.

Cleaning
1.

Remove the climate control air filter.

2.

Check that the climate control air filter is not excessively dirty.

  

If the climate control air filter is excessively dirty, replace the climate control air filter.

3.

If cleaning the climate control air filter, blow compressed air as shown in the illustration to clean it.

  

Be careful when aiming the compressed air in the climate control air filter.

Replacement
1.

Remove the glove box.

2.

Remove the filter cover (A) by pressing the knob.

3.

Replace the air filter (A) according to the replacement cycle on the user manual. When replacing it, mind the direction of the air filter.

  

To remove the filter easily, press the righthand side inward and then pull out the filter.

When driving in an air-polluted area or on rugged terrain, check and replace the air filter as frequently as possible.

4.

Install in the reverse order of removal.

Air Conditioner Refrigerant/Compressor
Repair procedures Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only U.L.-listed service equipment that is certified to meet the requirements of SAE J2210 when r ...

Maintenance Schedule
...

Other information:

Kia Forte 2019-2023 (BD) Service Manual: Tire (pressure & tread wear)


Repair procedures Inspection 1. Check the tire pressure. Tire Pressure Tire Front Rear 195/65 R15 230 kPa (33 psi) 230 kPa (33 psi) ...

Kia Forte 2019-2023 (BD) Owners Manual: Accumulated driving information mode (For type B, C cluster)


Displays accumulated information starting from a mileage/fuel efficiency/ time default point. Accumulated information is calculated after the vehicle has run for more than 300 meters (0.18 miles). If you press the “OK” button for more than 1 second after the Cumulative In ...

Copyright © www.kiforte.com 2017-2023