
(1) Trip Computer mode
This mode displays driving information like the tripmeter, fuel economy, and so on.
❈ For more details, refer to “Trip Computer” in this chapter.
(2) Turn By Turn mode(if equipped) This mode displays “turn by turn” instructions from the navigation system.
(3) Assist mode
-
: This mode displays the state
of tire pressure.
(4) User Setting mode
On this mode, you can change the settings of the doors, lamps and so on.
(5) Master warning mode
This mode informs of warning messages related to the below functions.
- Blind-Spot Collision Warning
(BCW) malfunction (if equipped)
- Blind-Spot Collision Warning
(BCW) radar blind (if equipped)
- Cruise Control system malfunction
(if equipped)
- Lamp malfunction
- LED head lamp malfunction (if
equipped)
- Engine oil shortage
❈ For controlling the LCD modes, refer to “LCD window Control” in this chapter.
The vehicle will display Driving Information once per once per each ignition cycle. Fuel efficiency is calculated after the vehicle has run for more than 300 meters (0.
Service in It calculates and displays (in mileage or days) when you need a scheduled maintenance service. If the remaining mileage or time reaches 1,500 km (900 mi.
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time are shown, the frequency of service is determined by whichever occurs first.
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.