Kia Forte: Sunroof / Sunshade, Resetting the sunroof
Sunshade
When opening the sunroof, the sunshade will also open. Once the sunroof is closed, the sunshade can be manually closed.
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, or related fuse is blown, you must reset your sunroof system as follows:
1.The ignition switch must be in the ON position.
2.Close the sunroof completely.
3.Release the control lever.
4.Push the control lever forward until the sunroof tilts and slightly moves up and down. Then, release lever.
5.Push the control lever forward until the sunroof is operated as follows:
TILT DOWN → SLIDE OPEN → SLIDE CLOSE
Then, release the control lever.
✽ NOTICE
Do not release the lever until the operation is completed. If you release the lever during operation, try again from step 2.
❈ For more detailed information, contact an authorized Kia dealer.
✽ NOTICE
If the sunroof is not reset when the vehicle battery is disconnected or discharged, or related fuse is blown, the sunroof may operate improperly.
Tilting the sunroof
To tilt open the sunroof, push the
sunroof control lever upward until the
sunroof moves to the desired position.
To close the sunroof, push the sunroof
lever forward until the sunroof
moves ...
Steering wheel
Electric power steering (EPS)
Power steering uses a motor to
assist you in steering the vehicle. If
the engine is off or if the power steering
system becomes inoperative, the
vehicle may stil ...
Other information:
Kia Forte 2019-2024 (BD) Service Manual: Fuel Delivery System
Components and components location Components Location Fuel Tank & Filler-Neck Assembly 1. Fuel Tank 2. Fuel Pump 3. Fuel Pump Plate Cover 4. Fuel Filler Hose 5. Leveling Tube 6. Vapor port [Fuel pump (Canister) → Intake Manifold] ...
Kia Forte 2019-2024 (BD) Service Manual: Auto Light Sensor
Repair procedures Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function Switch ...
