Kia Forte: Light bulbs / High mounted stop lamp (LED
type) bulb replacement
If the high mounted stop lamp (LED)
(1) does not operate, have the vehicle
checked by an authorized Kia
dealer.
The LED lamp cannot be replaced
as a single component because it is
an integrated unit. The LED lamp has
to be replaced with the unit.
A skilled technician should check or
repair the high mounted stop lamp
(LED), for it may damage related
parts of the vehicle.
Rear turn signal lamp bulb
replacement
If the rear turn signal lamp (1) does
not operate, have the vehicle
checked by an authorized Kia dealer.
Back up lamp bulb replacement
If the back u ...
1. Open the trunk lid.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb f ...
Other information:
The heating and cooling system can
be controlled manually by pressing
buttons or turning knob(s) other than
the AUTO button. In this case, the
system works sequentially according
to the order of buttons or knob(s)
selected.
1. Start the engine.
2. Set the mode to the desired position. ...
Components and components location
Components Location
1. Integrated memory system control
switch assembly
Schematic diagrams
Connector and Terminal function
Repair procedures
Removal
1.
Disconnect the ...