Kia Forte: Lighting / High beam operation
To turn on the high beam headlamp,
push the lever away from you. The
lever will return to its original position.
To turn off the high beam headlamps,
pull the lever towards you. It will return
to the normal (low beam) position
when released.
The high beam indicator light will illuminate
when the headlight high
beams are switched on.To prevent the
battery from being discharged, do not
leave the lights on for a prolonged time
while the engine is not running.
WARNING - High beams
Do not use high beam when
there are other vehicles in front
of your vehicle. Using high
beam could obstruct the other
driver’s vision.
To flash the headlights, pull the lever
towards you. It will return to the normal
(low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
The light switch has a Headlight and
a Parking light position.
To operate the lights, turn the knob at
the end of the control lever to one of
the following positions:
(1) OFF position
(2) ...
The High Beam Assist is a system
that automatically adjusts the headlamp
range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
...
Other information:
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
When replacing the LKA switch, check that the symbol mark in the cluster
operates normally by pressing the ON/OFF switch.
...
Filter replacement
The air filter must be replaced when
necessary, and should not be
washed.
While inspecting the air cleaner compartment,
the air filter can be
cleaned using compressed air.
1. Loosen the air cleaner cover
attaching clips and open the cover.
2. Wipe the inside of ...